Concrete Painting
Transforming Concrete into Art!
Our Concrete Painting Process
Transform your dull, weathered surfaces into the centerpiece of your home with a concrete painting campaign that proves you don’t have to replace to renew. By focusing on the dramatic shift from cold, industrial gray to vibrant, stylized finishes, your messaging can highlight how a simple coat of specialized paint or epoxy offers rock-solid protection and a high-end aesthetic. Whether you’re leaning into artistic flair with slogans like “Where Concrete Meets Creativity” or emphasizing rugged durability with “Rock-Solid Protection, Beautifully Done,” the goal is to show clients that their floors can be both tough and tasteful. Ultimately, this campaign invites homeowners to “Give Your Gray a New Style,” delivering a professional finish that stands the test of time while elevating the entire atmosphere of their space.
1. Preparation: Set the Foundation
- Clean the Concrete: Thoroughly sweep and remove all dirt, oil, and grease. Use a degreaser for stubborn stains.
- Pressure Wash: For exterior surfaces, use a pressure washer to remove loose debris, mildew, and dirt.
- Remove Existing Paint: If the old paint is peeling, use a scraper or wire brush to remove it.
- Repair Cracks: Fill any cracks or holes with concrete filler or caulk and allow it to dry completely.
“A masterpiece begins with perfect preparation.”
2. Application: Color Meets Character
- Apply Etching Solution: Use a concrete etching solution to make the surface porous so the paint can adhere.
- Scrub and Rinse: Scrub the etching solution into the surface with a stiff brush, let it sit, and then rinse thoroughly with water.
- Allow to Dry: Let the concrete dry completely
“Applying style, one square foot at a time.”
3. Priming: Seal the Success
- Apply Primer: Apply a coat of concrete primer using a brush for edges and a roller for large surfaces. This ensures the paint sticks properly.
- Dry Time: Let the primer fully dry overnight.
“Rugged by Design. Refined for Life.”
4. Painting: Paint the Success
- Cut-In Edges: Use a paintbrush to paint around the edges and in corners.
- Roll Main Area: Apply the concrete paint with a roller.
- Apply Multiple Coats: Apply at least two coats of paint, allowing for adequate drying time between coats.
“Durable by design, finished for life.”
Offering comprehensive residential and wallpaper services
Address:
2117 Madrid Ave Nepean ON. K2J 0K6
Phone:
(819)744-6022
Email & Website:
info@mjrspainting330.ca
www.mjrspainting330.ca
Hours of Operation
Mon - Fri 8:00 AM - 5:00 PM
